« Previous - Version 38/106 (diff) - Next » - Current version
Adrian Georgescu, 07/13/2011 09:10 am


= Device Configuration =

<acronym title="WikiStart, Sip*, depth=3">TOC</acronym>

There are thousands of SIP devices on the market, for how to configure them we advise you to consult the support forum of the device manufacturer.

Please do not open a ticket related to how a particular device must be configured.

Setup your SIP device as follows:

Account Credentials

Account credentials are used for authentication and authorization of SIP requests performed by the SIP device.

Username XXX
Password YYY
Domain sip2sip.info
  • Replace XXX with your username and YYY with your password received during the registration of your SIP account
  • Always Register must be On
  • Set the Registration refresh interval to 600 seconds

The address of the server is automatically discovered by the SIP device by using DNS.

[wiki:SipDevices Specific SIP devices configuration]

SIP Outbound Proxy

To traverse NAT you must use the proxy server:

Host Port Protocol
proxy.sipthor.net 5060 UDP
proxy.sipthor.net 5060 TCP
proxy.sipthor.net 5061 LTS
XCAP root

If you use SIMPLE presence you need to set XCAP root:

XCAP Root https://xcap.sipthor.net/xcap-root@sip2sip.info/
MSRP Relay

If you use SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.