ConnectivityProblems

Version 11 (Adrian Georgescu, 07/21/2013 10:24 pm)

1 1 Adrian Georgescu
h1. Connectivity Problems
2 1 Adrian Georgescu
3 11 Adrian Georgescu
Sometimes real-time communication between end-points fails. Real-time communications is a complex, for each sessions several ports and protocols are used in both directions. What are the possible reasons? Here is a short checklist to eliminate possible causes:
4 1 Adrian Georgescu
5 7 Adrian Georgescu
h2. Software version
6 7 Adrian Georgescu
7 8 Adrian Georgescu
 * Upgrade to the latest version, very often a problem may have already been solved.
8 7 Adrian Georgescu
9 1 Adrian Georgescu
h2. Local Computer
10 1 Adrian Georgescu
11 5 Adrian Georgescu
 * Firewall software installed. Check if no software blocks access to the ports used by your application or enable the use of the proper ports in the firewall configuration.
12 1 Adrian Georgescu
13 2 Adrian Georgescu
h2. Internet Router
14 1 Adrian Georgescu
15 11 Adrian Georgescu
 * SIP ALG enabled. Your router re-writes the content of your SIP packets. Check of the router has any so called SIP support and "disabled it":http://www.voip-info.org/wiki/view/Routers+SIP+ALG
16 5 Adrian Georgescu
 * Firewall enabled. Check if no software blocks access to the ports used by your application or enable the use of the proper ports in the firewall configuration.
17 1 Adrian Georgescu
18 3 Adrian Georgescu
h2. Internet Provider
19 1 Adrian Georgescu
20 1 Adrian Georgescu
 * Policy that blocks either SIP signalling or RTP media. You can try use another SIP service provider that provides access over TCP or TLS instead of UDP or is using custom ports. Otherwise use another ISP.
21 11 Adrian Georgescu
 * Often service provider do not allow use of ICE and force a relay instead. Turn of ICE in the client if this is the case.
22 1 Adrian Georgescu
23 3 Adrian Georgescu
h2. SIP Service Provider
24 1 Adrian Georgescu
25 1 Adrian Georgescu
 * Eequires use of STUN protocol so that the SIP devices uses a public IP address in the Contact header. This is wrong and unreliable, such behaviour is explicitly discouraged by the "standards":http://projects.ag-projects.com/projects/blinkc/wiki/MostEncounteredProblems#SIP-Provider-requires-STUN
26 1 Adrian Georgescu
 * Some codecs are not supported. Instead of rejecting such sessions with an appropriate code, they simply won't answer.