« Previous - Version 10/28 (diff) - Next » - Current version
Adrian Georgescu, 03/30/2009 12:28 pm


sip_audio_session
<acronym title="SipTesting*, sip_*, xcap*,depth=2">TOC</acronym>

To use this script you must to have a valid [wiki:SipSettingsAPI configuration].

=== Description ===

This script can be used for interactive audio session or for scripting alarms. The script returns appropriate shell response codes for failed or successful sessions. The script can be setup to auto answer and auto hangup after predefined number of seconds, detects SIP negative response codes, missing ACK and the lack of RTP media after a session has been established.

[[Image(http://www.tech-invite.com/img/cf3665/cf3665-32.gif)]]

Source code: [source:scripts/sip_audio_session.py scripts/sip_audio_session.py]

{{{
adigeo@ag-oxygen:~$sip_audio_session --help
Usage: sip_audio_session [options] []

This script can sit idle waiting for an incoming audio call, or perform an
outgoing audio call to the target SIP account. The program will close the
session and quit when Ctrl+D is pressed.

Options:
-h, --help show this help message and exit
-a NAME, --account=NAME
The account name to use for any outgoing traffic. If
not supplied, the default account will be used.
-c [FILE], --config_file=[FILE]
The path to a configuration file to use. This
overrides the default location of the configuration
file.
-s [stdout|file|all|none], --trace-sip=[stdout|file|all|none]
Dump the raw contents of incoming and outgoing SIP
messages. The argument specifies where the messages
are to be dumped.
-j [stdout|file|all|none], --trace-pjsip=[stdout|file|all|none]
Print PJSIP logging output. The argument specifies
where the messages are to be dumped.
-S, --disable-sound Disables initializing the sound card.
--auto-answer Interval after which to answer an incoming call
(disabled by default). If the option is specified but
the interval is not, it defaults to 0 (answer the call
as soon as it starts ringing).
--auto-hangup Interval after which to hangup an on-going call
(applies only to outgoing calls, disabled by default).
If the option is specified but the interval is not, it
defaults to 0 (hangup the call as soon as it
connects).
}}}

=== Example for incoming session ===

{{{
adigeo@ag-imac3:~$sip_audio_session
Using account
Available control keys:
h: hang-up the active session
r: toggle audio recording
t: toggle SIP trace on the console
j: toggle PJSIP trace on the console
<> : adjust echo cancellation
SPACE: hold/on-hold
Ctrl-d: quit the program
?: display this help message
Succesfully registered using contact "sip::61163"
Detected NAT type: Port Restricted
Incoming audio session from ""Adrian G." <sip:>", do you want to accept? (y/n)
Session established, using "PCMU" codec at 8000Hz
Audio RTP endpoints 192.168.1.6:50132 <-> 85.17.186.7:53358
Remote SIP User Agent is "CSCO/7"
Session ended by remote party.
Session duration was 3 seconds

}}}

=== Example for outgoing session ===

{{{
adigeo@ag-imac3:~$sip_audio_session
Using account
Initiating SIP session from "Adrian G." <sip:> to
sip: via udp:81.23.228.150:5060 ...
Available control keys:
h: hang-up the active session
r: toggle audio recording
t: toggle SIP trace on the console
j: toggle PJSIP trace on the console
<> : adjust echo cancellation
SPACE: hold/on-hold
Ctrl-d: quit the program
?: display this help message
Succesfully registered using contact "sip::61215"
Ringing...
Session established, using "speex" codec at 32000Hz
Audio RTP endpoints 192.168.1.6:50374 <-> 81.23.228.129:52156
Remote SIP User Agent is "sip2sip-0.9.0-pjsip-1.0.2-trunk-r2553"
Detected NAT type: Port Restricted
Ending session...
Session ended by local party.
Session duration was 12 seconds
}}}