Version 1/28 - Next ยป - Current version
Adrian Georgescu, 02/23/2009 11:35 am


sip_audio_session
<acronym title="SipTesting*, sip_*, depth=2">TOC</acronym>

To use this script you must to have a valid [wiki:SipConfiguration configuration file].

=== Description ===

This script can be used for interactive audio session or for scripting alarms. The script returns appropriate shell response codes for failed or successful sessions. The script can be setup to auto answer and auto hangup after predefined number of seconds, detects SIP negative response codes, missing ACK and the lack of RTP media after a session has been established.

Source code: [source:scripts/sip_audio_session.py scripts/sip_audio_session.py]

{{{
adigeo@ag-imac3:~$sip_audio_session -h
Usage: sip_audio_session [options] []

This script can sit idle waiting for an incoming audio call, or perform an
outgoing audio call to the target SIP account. The program will close the
session and quit when Ctrl+D is pressed.

Options:
-h, --help show this help message and exit
-a NAME, --account-name=NAME
The account name from which to read account settings.
Corresponds to section Account_NAME in the
configuration file. If not supplied, the section
Account will be read.
--sip-address=SIP_ADDRESS
SIP address of the user in the form user@domain
-p PASSWORD, --password=PASSWORD
Password to use to authenticate the local account.
This overrides the setting from the config file.
-n DISPLAY_NAME, --display-name=DISPLAY_NAME
Display name to use for the local account. This
overrides the setting from the config file.
-o IP[:PORT], --outbound-proxy=IP[:PORT]
Outbound SIP proxy to use. By default a lookup of the
domain is performed based on SRV and A records. This
overrides the setting from the config file.
-s, --trace-sip Dump the raw contents of incoming and outgoing SIP
messages (disabled by default). The argument specifies
where the messages are to be dumped.
-t EC_TAIL_LENGTH, --ec-tail-length=EC_TAIL_LENGTH
Echo cancellation tail length in ms, setting this to 0
will disable echo cancellation. Default is 50 ms.
-r SAMPLE_RATE, --sample-rate=SAMPLE_RATE
Sample rate in kHz, should be one of 8, 16 or 32kHz.
Default is 32kHz.
-c CODECS, --codecs=CODECS
Comma separated list of codecs to be used. Default is
"speex,g711,ilbc,gsm,g722".
-S, --disable-sound Do not initialize the soundcard (by default the
soundcard is enabled).
-j, --trace-pjsip Print PJSIP logging output (disabled by default).
--auto-hangup Interval after which to hangup an on-going call
(applies only to outgoing calls, disabled by default).
If the option is specified but the interval is not, it
defaults to 0 (hangup the call as soon as it
connects).
--auto-answer Interval after which to answer an incoming call
(disabled by default). If the option is specified but
the interval is not, it defaults to 0 (answer the call
as soon as it starts ringing).

}}}

=== Example for incoming session ===

{{{
adigeo@ag-imac3:~/Business/Personal$sip_audio_session
Accounts available: 'alice', 'as', 'bob', 'ew', 'ewt', 'mrg', 'pbx', 's', 'tf', 'umts', 'umts_test', 'unet', 'unet_test', default
Using default account:
Registering ""Adrian G." <sip:>" at 81.23.228.129:5060
REGISTER was successful
Contact: sip::49421;transport=udp (expires in 300 seconds)
Available control keys:
h: hang-up the active session
r: toggle audio recording
t: toggle SIP trace on the console
<> : adjust echo cancellation
SPACE: hold/on-hold
Ctrl-d: quit the program
?: display this help message
Waiting for incoming session...
Detected NAT type: Port Restricted
Incoming session...
Incoming audio session from "sip:", do you want to accept? (y/n)
Session established, using "speex" codec at 32000Hz
Audio RTP endpoints 192.168.1.6:40064 <-> 81.23.228.150:56618
Remote SIP User Agent is "sip2sip-0.4.0-pjsip-1.0.1-r2453"
Call is put on hold
Call is taken out of hold
Ending session...
Session ended by local party.
Session duration was 6 seconds
}}}

=== Example for outgoing session ===

{{{
adigeo@ag-imac3:~$sip a umts
Accounts available: 'alice', 'as', 'bob', 'ew', 'ewt', 'mrg', 'pbx', 's', 'tf', 'umts', 'umts_test', 'unet', 'unet_test', default
Using account 'umts':
Call from "Adi UMTS" <sip:> to sip: through proxy udp:85.17.186.7:5060
Available control keys:
h: hang-up the active session
r: toggle audio recording
t: toggle SIP trace on the console
<> : adjust echo cancellation
SPACE: hold/on-hold
Ctrl-d: quit the program
?: display this help message
Ringing...
Ringing...
Ringing...
Session established, using "speex" codec at 32000Hz
Audio RTP endpoints 192.168.1.6:40048 <
> 81.23.228.150:56616
Remote SIP User Agent is "sip2sip-0.4.0-pjsip-1.0.1-r2453"
Remote party has put the call on hold
Remote party has taken the call out of hold
Session ended by remote party.
Session duration was 6 seconds

}}}

=== Ongoing sessions ===

During an ongoing session you can record the audio stream in a file by pressing r. You can hangup by pressing h.