« Previous - Version 34/109 (diff) - Next » - Current version
Adrian Georgescu, 05/15/2011 10:47 am


= Device Configuration =

<acronym title="WikiStart, Sip*, depth=3">TOC</acronym>

There are thousands of SIP devices on the market, for how to configure them we advise you to consult the support forum of the device manufacturer. Do not open a ticket related to how a particular device is configured.

Setup your SIP application software or hardware device as follows:

SIP Credentials

SIP Credentials are used for authentication and authorization of SIP requests performed by the SIP device.

Username XXX
Password YYY
Domain sip2sip.info
  • Replace XXX with your username and YYY with your password received during the registration of your SIP account
  • Always Register
  • Set the Registration refresh interval to 600 seconds

[wiki:SipDevices Specific SIP devices configuration]

SIP Outbound Proxy
Outboud proxy proxy.sipthor.net

Though optional, is recommend that you always use the outbound proxy setting as this helps the NAT traversal and your device remains always reachable.

Some poorly implemented SIP devices are not able to determine the address of the proxy. Here are the details that you could enter manually:

Host proxy.sipthor.net
Port 5060
Protocol UDP
XCAP root

If you use SIMPLE presence you need to set XCAP root:

XCAP Root https://xcap.sipthor.net/xcap-root@sip2sip.info/
MSRP Relay

If you use SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.