SipDeviceConfiguration
Version 12 (Adrian Georgescu, 04/19/2009 02:25 pm) → Version 13/109 (Adrian Georgescu, 04/19/2009 02:26 pm)
= Device configuration =
[[TOC(WikiStart, Sip*, depth=3)]]
Setup your SIP application software or hardware device as follows:
== General ==
|| Username || XXX||
|| Password|| YYY||
|| Domain||sip2sip.info||
|| Outboud proxy ||proxy.sipthor.net||
Replace XXX with your username and YYY with your password received during the registration of your SIP account.
We recommend that you:
1. Always register and set the refresh interval to 600 seconds or longer
1. Always use the outbound proxy
1. Disable any keep-alive technique in the client (like pings, NOTIFY or STUN), the servers take care of all these automatically
1. Disable any SIP ALG support in the border router, most so called 'SIP enabled routers' are simply broken
== XCAP root ==
If you use SIP SIMPLE presence you need to set XCAP root:
|| XCAP root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ ||
== MSRP relay ==
If you use SIP SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.
[[TOC(WikiStart, Sip*, depth=3)]]
Setup your SIP application software or hardware device as follows:
== General ==
|| Username || XXX||
|| Password|| YYY||
|| Domain||sip2sip.info||
|| Outboud proxy ||proxy.sipthor.net||
Replace XXX with your username and YYY with your password received during the registration of your SIP account.
We recommend that you:
1. Always register and set the refresh interval to 600 seconds or longer
1. Always use the outbound proxy
1. Disable any keep-alive technique in the client (like pings, NOTIFY or STUN), the servers take care of all these automatically
1. Disable any SIP ALG support in the border router, most so called 'SIP enabled routers' are simply broken
== XCAP root ==
If you use SIP SIMPLE presence you need to set XCAP root:
|| XCAP root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ ||
== MSRP relay ==
If you use SIP SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.