SipDeviceConfiguration

Version 9 (Adrian Georgescu, 04/19/2009 02:23 pm)

1 3 Adrian Georgescu
= Device configuration =
2 1 Adrian Georgescu
3 2 Adrian Georgescu
[[TOC(WikiStart, Sip*, depth=3)]]
4 2 Adrian Georgescu
5 4 Adrian Georgescu
Setup your SIP application software or hardware device as follows:
6 1 Adrian Georgescu
7 1 Adrian Georgescu
==  General ==
8 1 Adrian Georgescu
 
9 5 Adrian Georgescu
 || Username || XXX||
10 5 Adrian Georgescu
 || Password|| YYY||
11 5 Adrian Georgescu
 || Domain||sip2sip.info||
12 5 Adrian Georgescu
 || Outboud proxy ||proxy.sipthor.net||
13 1 Adrian Georgescu
14 7 Adrian Georgescu
Replace XXX with your username and YYY with your password received during the registration of your SIP account. 
15 1 Adrian Georgescu
16 9 Adrian Georgescu
We recommend that you:
17 9 Adrian Georgescu
18 9 Adrian Georgescu
 1. Set the SIP Registration refresh interval to 600 seconds
19 9 Adrian Georgescu
 1. Disable any keep-alive technique in the client (like pings, NOTIFY or STUN)
20 9 Adrian Georgescu
 1. Disable any SIP support in the border router
21 9 Adrian Georgescu
22 7 Adrian Georgescu
23 1 Adrian Georgescu
== XCAP root ==
24 1 Adrian Georgescu
25 1 Adrian Georgescu
If you use SIP SIMPLE presence you need to set XCAP root:
26 1 Adrian Georgescu
27 5 Adrian Georgescu
 || XCAP root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ ||
28 1 Adrian Georgescu
29 1 Adrian Georgescu
== MSRP relay ==
30 1 Adrian Georgescu
31 7 Adrian Georgescu
If you use SIP SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.